Moulding Machine
Forms consistent moulds according to the selected moulding process and production requirements.
Ask About This EquipmentSUPPORTING SYSTEMS
Automatic Moulding Line
Automated mould production for stable, continuous and high-volume casting operations.
Integrate sand feeding, moulding, mould handling and production control into one coordinated system tailored to your casting requirements.
此处图片：Automatic Moulding Line 整线主视觉图，展示造型机、输送、砂处理及模具流转关系；不要只展示单独一台造型机；推荐比例：4:3 或 5:4
作用：让用户第一眼理解这是一套连续自动造型系统，而不是单台设备
Sand→Mould→Transfer→Pouring Prep
01 / SYSTEM OVERVIEW
Automated Mould Production as One Coordinated Line
Coordinate automated mould forming, prepared sand feeding, mould transfer, core setting, mould closing and production synchronization as one configurable route.
Continuous production is expressed as a coordinated sequence of sand preparation, automatic moulding and mould transfer.
- Mould Size
- Customized
- Production Capacity
- Based on project requirements
- Cycle Time
- Project dependent
- Automation Level
- Manual / Semi-auto / Automatic
02 / PROCESS WORKFLOW
Automatic Moulding Process
A continuous route from prepared sand to moulds ready for the pouring interface.
- 01
Sand Preparation
Receive prepared moulding sand for the selected production route.
- 02
Sand Feeding
Provide sand continuously and consistently to the moulding section.
- 03
Moulding
Form consistent moulds according to the selected process and requirements.
- 04
Mould Transfer
Move moulds between forming and the following line stations.
- 05
Core Setting
Place cores manually, semi-automatically or automatically when required.
- 06
Mould Closing
Complete mould assembly before the pouring handoff.
- 07
Pouring Preparation
Present closed moulds and line information for the next operation.
03 / CORE EQUIPMENT
Equipment that makes the system work as one route.
These equipment groups frame the project conversation. Final selection and quantities remain configured to the application.
Sand Feeding System
Provides prepared moulding sand continuously and consistently.
Ask About This EquipmentMould Conveyor
Transfers moulds between forming, core setting, closing and pouring preparation stations.
Ask About This EquipmentCore Setting Station
Supports manual, semi-automatic or automated core placement.
Ask About This EquipmentMould Closing Unit
Completes mould assembly before pouring.
Ask About This EquipmentControl System
Coordinates line operation, interlocks and production sequence.
Ask About This Equipment04 / CONFIGURATION
Flexible Line Configuration
Configure the route around casting size, mould dimensions, output, workshop layout, automation target and available space.
- 01Sand PreparationPrepared sand input↓
- 02MouldingMould formation↓
- 03Mould HandlingTransfer and buffer↓
- 04Core / ClosingAssembly interface↓
- 05Pouring InterfaceReady mould handoff↓
- 06Control SystemSequence and interlocks
05 / TECHNICAL DATA
Technical parameters remain project-configured.
Use these fields to structure a review. No fixed machine model, capacity or performance number is implied.
| Mould Size | Customized |
|---|---|
| Production Capacity | Customized |
| Moulding Method | Project dependent |
| Automation Level | Semi-auto / Automatic |
| Layout | Customized |
| Control System | PLC-based |
| Power Supply | According to destination market |
| Dust Collection | Optional / Integrated |
06 / CONFIGURATION INPUTS
Designed Around Your Casting Process
The line is configured around the part range, mould requirements and factory conditions available for the project.
- 01Casting Size
- 02Mould Dimensions
- 03Required Output
- 04Workshop Layout
- 05Automation Level
- 06Upstream / Downstream Equipment
07 / APPLICATIONS
Typical Applications
Use these categories to frame the project discussion without implying a fixed application limit or customer case.
- 01Automotive castings
- 02Pump and valve castings
- 03Machinery components
- 04Agricultural machinery castings
- 05General engineering castings
08 / FAQ
Questions to settle before an engineering review.
Answers are structured around process scope, project inputs and system interfaces.
01What information is required to design an automatic moulding line?+
Start with casting type, mould size, target output, current moulding process, workshop information and the automation direction under consideration.
02Can the line be integrated with our existing sand preparation system?+
Existing sand preparation equipment and interfaces can be reviewed as part of the line configuration.
03Can the moulding line be customized to our mould size?+
Yes. Mould dimensions are a project input and the line arrangement remains customized to the selected process.
04What automation level is available?+
Manual, semi-automatic and automatic directions can be discussed by station and by the required production sequence.
05Can core setting be included in the line?+
Core setting can be included when the casting geometry and project scope require it.
06Can the line connect with pouring equipment?+
The mould closing and pouring preparation interface can be defined around the downstream equipment.
07How is production capacity determined?+
Capacity is configured from casting information, mould size, cycle requirements, stations, handling and workshop conditions.
FINAL SYSTEM REVIEW
Planning an Automatic Moulding Line?
Send us your casting size, mould dimensions, target output and workshop information. Our engineering team can help define the line configuration.
- Please include the following information if available:
- Casting drawings
- Mould size
- Target output
- Workshop layout
Requirement → Configuration → ProposalRequest a Line Proposal